Dynamic Delay - Multichannel AUDIO

SynchroCast3 was optimized for multichannel LMR Simulcast Reliable and proven, over 500 installed sites Built and supported in USA by Harris Maintains T1 framing and simulcast control through short microwave drops IP version allows simulcast over VLANs or IP radios

Data sheet - T1 Data Sheet - IP Manual Video Bid Specs Drawings Accessories Quotation

• Uses GPS to enable compensation for path length changes.
• Suitable for applications including loop microwave, SONET, VLAN, and telco T1.
• Modular chassis allows individual selection of channel quantities and types.
• Version with fixed delay available for point-to-point microwave systems.

Transmit sites and Control Point

Outputs/Inputs
In/Out	4) 4-wire Audio with E & M	50-pin or 4)RJ45
Input	1PPS	RJ11 / BNC
Input	10 MHz	BNC
In/Out	T1 or IP	RJ-48C or
Output	Alarms	TB
Control	RS-232 or IP	DB9 or
Power	115 VAC, alt 220 alt 48 or 24 VDC	Line cord TB

Email Simulcast Solutions for SynchroCast3 pricing and pricing on Synchrocast (Multiplexers with adjustable fixed delay); system specific. Dealer pricing available.

Options:

Voice grade Audio (300 - 3000 Hz)
Wideband Audio (5 to 3000 Hz)
Data modules (RS232 async, RS232 sync, )
Ethernet modules
Video modules
FXS/FXO modules

Requires one Spectracom GPS Master Oscillator per site, including control point.

19"W x 5.25"H (3ru) x 14.5"D. Intraplex Products are manufactured by Harris Corporation.

If you have this product and need technical assistance, please call 217-222-8200, tsupport@harris.com.

Specifications subject to change or improvement without notice. 3/17/2008.

Simulcast Solutions®LLC 18 Port Meadow Trail, Fairport, NY, USA, 14450 TEL: (585) 223-4927, FAX: (585) 223-3255 info@simulcastsolutions.com